Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
204
Fax Defaults
Purpose: To modify the defaults for the [Fax] menu.
Notes:
•
The FAX service cannot be used unless you set up a region code under [Region].
• Bold values are the factory default menu settings.
Resolution
Purpose: To specify the scan resolution to improve the output quality.
Values:
Note: Faxes scanned in the Super Fine mode transmit at the highest resolution supported by the
receiving device.
2-Sided Scanning
Purpose: To scan both sides of a sheet of paper.
This item is available only when [2-Sided Scanning] is set to [2-Sided Printing] in the [Scan Defaults] menu.
Lighten/Darken
Purpose: To adjust the density to make the copy lighter or darker than the original.
Standard Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The Super Fine
mode is enabled only if the remote device also supports the Super Fine
mode. See the notes below.
Photo Suitable for documents containing photographic images.
1-Sided Scans one side of a document.
2-Sided Binding of
Original
*
Long Edge
Binding
Scans both sides of a document to be bound by long
edge.
Short Edge
Binding
Scans both sides of a document to be bound by short
edge.