Xerox DocuCentre SC2020

Fax
Xerox
®
DocuCentre
®
SC2020
User Guide
109
You can also select the recipient by using speed dial number or address book.
Notes:
•
You can enter a fax number using the ten key, *, and #.
• Pressing the <Redial/Pause> button enables you to enter a pause in the fax number.
• Entering "=" in the fax number enables dial tone detection.
• Entering ":" enables you to switch dialing type from dial pulse (DP) to push button (PB).
7. Press the <Start> button to begin sending the fax.
Note: By pressing the <Stop> button, you can cancel the fax job at any time while sending the fax.
Sending a Delayed Fax
The Delayed Start mode can be used to save scanned documents for transmission at a specified time to
take advantage of lower long distance rates.
1. Place document in the device.
2. Press the <Services Home> button.
3. Select [Fax].
Services Home
Job Status
Machine Status
<Services Home> button