Xerox DocuCentre SC2020

Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
29
4. Press the power switch to the [ | ] position to turn the power ON.
Using the Ethernet Interface
The device supports 100BASE-TX and 10BASE-T Ethernet interfaces.
To connect the Ethernet interface:
1. Press the power switch to the [ ] position to turn the power OFF.
Note: Ensure that the display is turned off.
2. Connect a network cable to the Ethernet port.
Note: Prepare a network cable suitable for your network connection. When you replace the network
cable, contact our Customer Support Center.