Maintenance
Xerox
®
DocuCentre
®
SC2020
User Guide
250
Do not use benzene, paint thinner, or other organic solvents. Doing so may damage paint or coating on
plastic parts.
Note: Cleaning the device with an excessive amount of water may cause the device to malfunction or
damage documents during copying or scanning.
1. Wipe the document presser with a soft cloth moistened with water to remove any dirt, and then wipe
it with a soft, dry cloth.
Do not press the film with an excessive force as it can be easily damaged.
Notes:
•
Do not use cleaning agents other than water or neutral detergent.
• If you cannot remove dirt easily, gently wipe the document presser with a soft cloth
moistened with a small amount of neutral detergent.
2. Wipe the narrow glass strip with a soft cloth moistened with water to remove any dirt, and then wipe
it with a soft dry cloth.
Do not use cleaning agents other than water or neutral detergent.
Note: If you cannot remove dirt easily, gently wipe the narrow glass strip with a soft cloth moistened
with a small amount of neutral detergent.
Cleaning Document Feeder Rollers
If the document feeder rollers become soiled, smudges may appear on copies, faxes or scanned documents
and paper jams may occur.
To ensure clean copies at all times, clean the document feeder rollers about once a month.