Maintenance
Xerox
®
DocuCentre
®
SC2020
User Guide
252
Checking or Managing the Device with CentreWare Internet
Services
When the device is installed in a TCP/IP environment, you can use CentreWare Internet Services to check
the device status, the remaining volume of consumables, and the paper loaded in this device. You can also
use CentreWare Internet Services to configure device settings.
Note: When using the device as a local printer, you cannot use CentreWare Internet Services.
Starting CentreWare Internet Services
Use the following procedure to start CentreWare Internet Services.
1. Launch your web browser.
2. Enter the IP address in the browser address field, and then press the Enter key.
The CentreWare Internet Services screen appears.
For more information on the items that can be set in each CentreWare Internet Services screen, click
the [Help] button to display the online Help.
Status Messenger
When connected in a network environment where sending and receiving of email is possible, the device
can send an email report to specified email addresses containing the following information:
• The network settings and the device status
• The error status which has occurred on the device
Setting the Email Environment
Activate CentreWare Internet Services. On the [Properties] tab, configure the following settings according
to your email environment. After configuring the settings on each screen, always click [Apply] and then
turn off/on the device to reboot. For information on each item, refer to the online help for CentreWare
Internet Services.
Item Item to be configured Description
StatusMessenge
r
Recipient Email Address Set the email address where notices about
changes in device status or errors are sent.
Notification Items Set the contents of the notices to send in the
email.
Port Status StatusMessenger Select [Enabled].