Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
206
Delayed Send
Purpose: This feature enables you to set a specific time for the fax transmission to start. Once [Delayed
Send] mode is activated, the device stores all of the documents to be faxed into its memory and sends
them at the specified time. After faxing in the [Delayed Send] mode is complete, the data in the memory is
cleared.
Values:
Note: A maximum of 19 delayed fax jobs can be stored in the device.
Tray Management
Use the [Tray Management] menu to define the print media loaded in Tray 1 and Tray 2.
Note: Bold values are the factory default menu settings.
Tray Settings
Purpose: To configure tray settings.
Tray 5 (Bypass)
Purpose: To specify the paper loaded in Tray 5 (bypass).
Folio (8.5 x 13")
Letter (8.5 x 11")
A3 (297 x 420 mm)
B4 (257 x 364 mm)
A4 (210 x 297 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
8K (270 x 390 mm)
21:00/9:00 PM Specify the fax transmission start time when sending a fax at a specified
time.
0:00–23:59/
1:00–12:59 AM/PM