Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
207
Values:
Display
Tray
Prompt
Enter a check to display a popup message that prompts to set Type and Size when
paper is loaded in Tray 5 (bypass). The factory default is on (check).
Use Driver
Settings for
Print Job
Enter a check to use the Size and Type set on the print driver. The factory default is off
(blank).
Size
(mm series)
A3 (297 x 420 mm)
*
B4 (257 x 364 mm)
A4 (297 x 210 mm)
A4 (210 x 297 mm)
B5 (257 x 182 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
8K (270 x 390 mm)
16K (270 x 195 mm)
16K (195 x 270 mm)
Tabloid (11 x 17")
Legal (8.5 x 14")
Folio (8.5 x 13")
Letter (8.5 x 11")
Letter (8.5 x 11")
Custom Size Length(x) 210 mm Specifies the length of the custom
size paper.
98–432 mm
Width(y) 297 mm Specifies the width of the custom
size paper.
89–297 mm