Xerox DocuCentre SC2020

Xerox
®
DocuCentre
®
SC2020
User Guide
124
7
Scan
This chapter describes the print function.
Scanning Procedure
This section describes the basic flow of scan operations including placing document in the device and
making advanced settings.
Placing the Document
The following two methods are available to load documents:
• Document feeder
– Single sheet
– Multiple sheets
•Document glass
– Single sheet
– Bound documents, such as books
Document Feeder
Supported document sizes
You can place the standard size document in the document feeder.
When document is placed in the document feeder, the device detects the document size automatically.
The following standard size documents are detected automatically: A3 , B4 , A4 , A4 , B5 , B5
*
,
A5 , 11 × 17" , 8.5 × 14"
*
, 8.5 × 13"
*
, 8.5 × 11" , 8.5 × 11" , 8K , 16K , and 16K
*
.
Note: The document sizes with an asterisk can be automatically detected depending on the settings.
You can select one of the following alternative document sizes. For more information, refer to
Original
Size Detected
on page 176.
B5 (default) or 16K