Environment Settings
Xerox
®
DocuCentre
®
SC2020
User Guide
28
Additionally, in most regions, you are required by law to indicate your fax number on any fax you send.
Notes:
•
This option is available when the Fax Kit (optional) is installed.
• For information on how to make the region setting, refer to Region on page 165.
• For information on how to make the date and time settings, refer to Date & Time on
page 175.
• For information on how to make the fax number settings, refer to Fax Number on page 165.
Interface Cables
When connecting the device directly to a computer, use a USB interface. When connecting the device to a
network, use an Ethernet interface.
Using the USB Interface
The device supports the USB 2.0 interface.
To connect the USB interface:
1. Press the power switch to the [ ] position to turn the power OFF.
Note: Ensure that the display is turned off.
2. Connect a USB cable to the USB port.
3. Connect the other end of the USB cable to the computer.
To Next Page
Loading...
