Scan
Xerox
®
DocuCentre
®
SC2020
User Guide
131
3. Click [Paint] > [From scanner or camera] (Click [File] > [From Scanner or Camera] for Windows Server
2008 and Windows Vista.
The [Scan using FX DocuCentre SC2020 (WIA - USB)] window appears..
Note: The illustration may vary for different operating systems
4. Select [Document Feeder] or [Flatbed] in [Paper source].
Note: Select [Document Feeder] when you want to scan the document loaded in the document feeder.
Select [Flatbed] when you want to scan the document loaded on the document glass.
5. Select your scanning preferences and click [Adjust the quality of the scanned picture] to display the
[Advanced Properties] dialog box.
6. Select the desired properties including brightness and contrast, and then click [OK].
7. Click [Scan] to start scanning.
8. Click [Save] from the [Paint] menu.
9. Enter a picture name, and select a file format and destination to save the picture.
Using a Scanner on the Network
This section describes how to use a scanner on the network.
Note: This feature does not require a network scan driver.
To Next Page
Loading...
