Xerox DocuCentre SC2020

Scan
Xerox
®
DocuCentre
®
SC2020
User Guide
142
2. Click [Email].
3. Specify the settings for Email as follows:
[SMTP Server Address]: Enter the IP address of the Email server.
[EMail Send Authentication]: Specify [Invalid] to enable the Email server.
Note: If an error message including 016–506 or 016–764 is displayed, contact your server
administrator for the settings for [Email Send Authentication].
4. Click [Apply].
Registering a New Email Address
The following procedure uses Windows 7 as an example.
1. Launch your web browser.
2. Enter the IP address of the device in the address bar, and then press the <Enter> key.
The device web page appears.
Note: For information on how to check the IP address of the device, refer to Checking the Device IP
Address
on page 230.
3. Click the [Address Book] tab.