Xerox DocuCentre SC2020

Copy
Xerox
®
DocuCentre
®
SC2020
User Guide
79
2. Select [Copy].
3. Select the desired setting item as needed.
Output Color
To select the mode for color or black and white copying.
1. Select [Output Color] on the [Copy] tab.
2. Select [Full Color] or [Black & White], and then select [OK].
Note: Color copy is secured with a passcode if the [Service Lock] setting for [Copy] is set to [On] (Color
Password Locked). If you set [Output Color] to [Full Color] and the [Service Lock] setting for [Copy] to
[On] (Color Password Locked), you will need to enter the four digit passcode after pressing the <Start>
button.