Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
214
Values:
Executing Calibration
The device can automatically calibrate colors using the calibration chart when the reproducibility of
density or color in copies and prints deteriorates.
If [Output Color] is set to [Black & White] calibration will not be executed.
Notes:
•
During auto calibration, the device cannot receive print jobs, cannot send or receive faxes
and cannot transmit data via network. It also cannot shift into the Power Saver mode.
• If density or color is not calibrated well despite the periodic execution of auto calibration,
contact our Customer Support Center.
1. Press the <Machine Status> button.
2. Select the [Tools] tab.
QWERTY
AZERTY
QWERTZ
Services Home
Job Status
Machine Status
<Machine Status> button