Xerox
®
DocuCentre
®
SC2020
User Guide
68
5
Copy
This chapter describes the Copy functions and operations.
Overview of Copy Operations
This section describes the basic flow of copy operations including placing document in the device and
making advanced settings.
Notes:
•
This device reads documents using a CIS sensor. The focus depth of the CIS sensor is
shallow, resulting in differences in image quality depending on the type of document and
the position in which the document is set. Take note of the following.
• If image quality is a priority, use the document glass instead of the document feeder.
• Set the curled documents, 3D objects, books, etc., closely against the document glass.
Placing Document
The following two methods are available to place document:
• Document feeder
• Single sheet
• Multiple sheets
•Document glass
• Single sheet
• Bound documents, such as books
Document Feeder
Supported document sizes
You can place standard size documents in the document feeder.