Copy
Xerox
®
DocuCentre
®
SC2020
User Guide
69
When document is placed in the document feeder, the device detects the document size automatically.
The following standard size documents are detected automatically: A3 , B4 , A4 , A4 , B5 , B5 *,
A5 , 11 × 17" , 8.5 × 14" *, 8.5 × 13" *, 8.5 × 11" , 8.5 × 11" , 8K , 16K , and 16K *.
Note: The document sizes with an asterisk can be automatically detected depending on the settings.
You can select one of the following alternative document sizes. For more information, refer to
Original
Size Detected
on page 176.
– B5 (default) or 16K
– 8.5 × 14" (default) or 8.5 × 13"
Note: When using 2-sided document placed in the document feeder, make sure to set [Binding of
Original] properly.
Supported document types (weights)
Documents with weights from 38-128 g/m
2
(50-128 g/m
2
for 2-Sided documents) can be placed in the
document feeder and scanned.
The document feeder accepts the following number of sheets.
Note: To avoid paper jams, use the document glass for mixed size, folded, wrinkled, cut-and-pasted
documents, curled paper, or carbon-backed paper. If you can flatten the curled document, you can use
the document.
Follow the steps below to place document in the document feeder.
You can place a single or multiple pages of a document.
1. Remove any paper clips or staples from document before placing it in the document feeder.
2. Place the document in the center of the document feeder, with the side to be scanned (or the front
surface of a 2 sided document) facing up.
Document Type (g/m
2
)
Number of Sheets
Lightweight (38-80 g/m
2
)
110 sheets
Heavyweight (81-128 g/m
2
)
75 sheets
To Next Page
Loading...
Need help?
General
Weight and Dimensions
