Fax
Xerox
®
DocuCentre
®
SC2020
User Guide
98
Starting the Fax Job
1. Press the <Start> button.
If the document is placed in the document feeder, do not press down on the document while it is
being fed through the device.
Notes:
•
If the memory becomes full when document is being scanned, the device stops scanning
and sending the document, and the fax job is canceled.
• The maximum number of pages that can be scanned for a single scan command is 100
pages from the document glass, 165 pages from the document feeder for 1-Sided
documents, and 330 pages from the document feeder for 2-Sided documents.
Notes:
•
The numbers are limited when the memory for accumulating fax jobs has reached its limit.
• If a problem occurs, an error message appears in the display. Follow the instructions in the
message to solve the problem.
When sending faxes of multiple sets of documents
When the document is placed on the document glass, the display prompts you for another page. If you
want to place a new document, replace the document with a new document, and then select [Scan
Another Page]. When you have finished loading documents, select [Done. Fax Now].
Operations during Faxing (Sending)
You can cancel the fax currently being sent, and check or cancel pending jobs.
Power Saver
Redial/Pause
Data
Error
Clear All Stop
Start