Xerox DocuCentre SC2020

Loading Paper
Xerox
®
DocuCentre
®
SC2020
User Guide
67
2. Select the [Tools] tab.
3. Select [Tray Management] > [Tray Settings].
4. Select the desired paper tray.
5. Select [Type], and then select the desired paper type.
Notes:
•
If you select Tray 5 (bypass), [Size] and [Type] are displayed. To change the paper size, select
[Size]. To use a non-standard document size, set [Size] to [Custom Size], and then specify the
paper size
• When using a non-standard size envelope, specify the size without the flap in [Custom Size].
6. Select the desired paper type.
7. Select [OK].