Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
156
* The default for [Output Size] varies depending on region-specific factory.
Notes:
•
Selecting [Custom Size] for the paper size prompts you to enter a custom length and width.
• When using a non-standard size envelope, specify the size without the flap in [Custom Size].
Orientation
Purpose: To specify how text and graphics are oriented on the page.
Values:
2-Sided Print
Purpose: To specify whether to print on both sides of a sheet of paper.
Values:
A4 (210 x 297 mm)
B5 (182 x 257 mm)
A5 (148 x 210 mm)
8K (270 x 390 mm)
16K (195 x 270 mm)
Custom Size Length (x) 11.7 inch Specifies the
length of the
custom size paper.
3.9–17.0 inches
Width (y) 8.3 inch Specifies the width
of the custom size
paper.
3.5–11.7 inches
Portrait Prints text and graphics parallel to the short edge of the
paper.
Landscape Prints text and graphics parallel to the long edge of the
paper.
1-Sided - Sets the value in increments of
1.
2-Sided Binding Edge Long Edge Flip Prints on both sides of a sheet
of paper to be bound by long
edge.
Short Edge Flip Prints on both sides of a sheet
of paper to be bound by short
edge.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
