Xerox DocuCentre SC2020

Tools
Xerox
®
DocuCentre
®
SC2020
User Guide
160
Values:
Line Termination
Purpose: To add the line termination commands.
Values:
Output Color
Purpose: To specify the color mode to Color or Black and White. This setting is used for a print job that does
not specify a print mode.
Values:
Ignore Form Feed
Purpose: To specify whether to ignore blank pages that only contain Form Feed control codes.
Values:
Disable Does not print in the draft mode.
Enable Prints in the draft mode.
Off The line termination command is not added.
CR=CR, LF=LF, FF=FF
Add-LF The LF command is added.
CR=CR-LF, LF=LF, FF=FF
Add-CR The CR command is added.
CR=CR, LF=CR-LF, FF=CR-FF
CR-XX The CR and LF commands are added.
CR=CR-LF, LF=CR-LF, FF=CR-FF
Black and White Prints in the black and white mode.
Color Prints in the color mode.
Off Disables the Ignore Form Feed feature.
On Enables the Ignore Form Feed feature.