Product Overview
Xerox
®
DocuCentre
®
SC2020
User Guide
49
3 <Redial/Pause> button Press this button to re-dial a fax number.
Press this button to insert a pause between numbers when
entering a recipient's number.
4 <Clear All> button Press this button to reset the displayed settings of each feature to
default values or clear the entered numbers. The setting is
returned to the same condition as the device is powered on.
5 <Power Saver> button Lights up when the device enters Power Saver mode to conserve
power when the device is left idle for a while. You can also press
this button to enter or exit Power Saver mode.
6 <Stop> button Press this button to cancel a current job or failed job.
7 <Start> button Press this button to start scanning documents or confirm the value
of each setting.
8 <Error> LED Blinks if a system error occurs.
This indicator lights up when a problem other than a system error
occurs with the device, including paper jams and running out of
paper.
9 <Data> LED Blinks when the device is sending or receiving data to or from a
client. This indicator lights up when data is stored in the device's
memory or when the device receives faxes waiting to be printed.
10 <C> (Clear) button Press this button to delete one numerical value that you have
entered.
11 <Machine Status> button Press this button to print reports and check the device information
such as the status of consumables and the device IP address.
12 <Job Status> button Press this button to check/cancel a current job or pending job.
13 <Services Home> button Press this button to display the Services Home screen.
No. Component Function