Xerox PHASER 6121MFP - Page 112

3-6 Phaser 6121MFP Service Manual
Error Messages and Codes
0503 Thermistor failure
CODE (0503)
Turn power off, on
page 3-79
0510 Fuser failure
CODE (0510)
Turn power off, on
page 3-80
0520 Fuser failure
CODE (0520)
Turn power off, on
page 3-80
0650 Scanner home failure
CODE (0650)
Turn power off, on
page 3-81
0F51 Waste toner failure
CODE (0F51)
Turn power off, on
page 3-82
1038 Interface failure
CODE (1038)
Turn power off, on
page 3-83
133C Fax modem failure
CODE (133C)
Turn power off, on
page 3-84
13C0 Engine board failure
CODE (13C0)
Turn power off, on
page 3-84
13DD Initial toner failed
CODE (13DD)
Replace toner
Contact Xerox
for unit exchange
page 3-85
13E2 Engine ROM failure
CODE (13E2)
Turn power off, on
page 3-85
14A3 Scanner head failure
CODE (14A3)
Turn power off, on
page 3-86
3C00 Eng. EEPROM failure
CODE (3C00)
Turn power off, on
Contact a Xerox
representative to
correct this error.
3C10 Eng. EEPROM failure
CODE (3C10)
Turn power off, on
Contact a Xerox
representative to
correct this error.
3FFF Control ROM failure
CODE (3FFF)
Turn power off, on
page 3-87
Message
Code
Message
Troubleshooting
Procedure