Phaser 6121MFP Service Manual A-9
Reference
Scan Menu
This section contains:
• “Scan Menu – Main” on page A-9
• “Scan Default Setup Menu” on page A-10
To access the Scan Menu, press the Scan button on the control panel.
Scan Menu – Main
Menu Item Contents
Scan To: Specifies the default scan destination:
■ Email (Phaser 6121MFP/N or /D printer
configurations only)
■ PC: Scan Dashboard (Windows only)
■ USB Memory
■ FTP (Phaser 6121MFP/N or /D printer
configurations only)
Resolution Specifies the scan resolution in dpi (dots per inch).
Original Document
Type
Specifies the type of content being scanned:
■ Mixed – Text with images/photos.
■ Text – Text only.
■ Photo – Photos only.
File Format Specifies the output file type the scanned image is
saved as: TIFF, PDF, JPEG.
Lighten/Darken Specifies how light or dark the resulting scanned
image are (also called “scan density”).
Document Size Specifies the size of the original document.
Black/White Mode Gray (8 bit) or B/W (1 bit) if used for a B&W scan.
Subject
(Phaser 6121MFP/N or
/D printer configurations
only)
Specifies subject used when sending scanned to an
email address.
Scan Default Setup (for
details, see “Scan Default
Setup Menu” on
page A-10)
■ Resolution
■ Output File Format
■ Black/White Compression
■ Email File Size
■ Lighten/Darken
■ Original Document Type
■ Scan To:
■ Subject
System Menu Provides accesses to the System Menu.
To Next Page
Loading...
