2-32 Phaser 6121MFP Service Manual
Theory of Operation
Transfer Belt
The Transfer Belt serves to accumulate the images produced by the four developer
rollers before transferring the composite image to the media with the Transfer
Roller. Components of the Transfer Belt appear below.
In addition to the Transfer Belt, a Transfer Roller (sometimes referred to as the 2nd
Transfer Roller) transfers the composite image to the media for fusing.
s6121mfp-138
Transfer Belt
Drive Roller
Belt Positioning Sensor
Transport Belt
1st Transfer
Roller
Driven Roller
Toner
Collecting Auger
Cleaning Blade
IDC Sensor
s6121mfp-284
2nd Transfer Roller
Pressure
Slider
Pressure/Retraction Roller
To Next Page
Loading...
