6-40 Phaser 6121MFP Service Manual
Adjustments and Calibrations
Fixed Zoom Change
Function
The fixed zoom ratios can be changed.
Procedure
1. Enter the Service Mode.
2. Select Fixed Zoom Change and press the OK button.
3. Select the fixed zoom ratio that you wish to change and press the OK button.
4. Use the 10-Key Pad to type in the following metric (or inch) fixed zoom ratio.
Metric Values
Inch Values
Setting name Initial zoom ratio Setting range
Reduction2 70% 51% to 70%
Reduction1 81% 71% to 99%
Expansion1 115% 101% to 140%
Expansion2 141% 141% to 199%
Setting name Initial zoom ratio Setting range
Reduction2 64% 51% to 64%
Reduction1 78% 65% to 99%
Expansion1 129% 101% to 153%
Expansion2 154% 154% to 199%
To Next Page
Loading...
