6-42 Phaser 6121MFP Service Manual
Adjustments and Calibrations
Clear Data
SRAM Clear
Function
To clear the errors and reset settings to default for the following functions.
• Menu: Set to default
• User Service Mode: Set to default
• Display: [Print Report] - [TX/RX Result] Clear
•Fax function: Clear
• Service’s Choice: Set to default
Notes
• Before executing SRAM Clear, record the settings that are initialized through
SRAM Clear.
• For recording the setting values, it is a good idea to print the reports and lists.
• Some settings are not included in any reports or lists. Make a note of them
separately.
• After SRAM Clear has been executed, reenter the recorded data.
Memory Clear
Function
To clear the settings for the functions listed below and return the functions to their
default settings:
• Service’s Choice: Set to default.
• Fixed Zoom Change: Set to default.
Notes
• Before executing Memory Clear, record the setting values that are to be
initialized through Memory Clear.
• For recording the setting values, it is a good idea to print the reports and lists.
• Some settings are not included in any reports or lists. Make a note of them
separately.
• After Memory Clear has been executed, make necessary entries of data again
based on the recorded values.
To Next Page
Loading...
