6-36 Phaser 6121MFP Service Manual
Adjustments and Calibrations
Fax Res. Copy Test
Function
Stores a fax image in memory and provides a printed copy.
Use
To test the creation of a fax image.
Procedure
1. Select Function > Fax Res. Copy Test, and press OK.
2. Press the Menu key to begin the Fax Res. CopyTest.
A printed copy is delivered to the output tray.
Scan Test
Function
To check the lighting of the Exposure Lamp and the movement of the Scanner
Unit.
Use
If the scanner malfunctions.
Procedure
1. Select Function > Scan Test, and press OK.
2. Press the Stop key to stop the scanner test.
Soft Switch
Soft Switch Information unavailable. Used for internal development unless
otherwise specified in troubleshooting procedures.
To Next Page
Loading...
