Phaser 6121MFP Service Manual 6-35
Adjustments and Calibrations
ADF Feed Test
Function
To check the paper feeding in the paper take-up/transport sections in the
Automatic Document Feeder.
Use
When a document misfeed occurs.
Procedure
1. Load paper into the Automatic Document Feeder.
2. Select Function > ADF Feed Test, and press OK.
3. Press the Stop key to stop testing paper feeding.
Check Scan Window
Function
To check for dirt in the scanning section of the Automatic Document Feeder.
Use
If spots appear in the copies.
Procedure
1. Load A4S or LetterS paper into Tray1.
2. Select Function > Check Scan Window, and press OK.
Two copy samples are fed out.
3. Check that no spots appear in the copy samples.
To Next Page
Loading...
