A-10 Phaser 6121MFP Service Manual
Reference
Scan Default Setup Menu
Fax Menu
This section contains:
• “Fax Menu – Main” on page A-11
• “Fax Default Setup Menu” on page A-12
• “Fax Send Options Setup Menu” on page A-13
• “Fax Receive Options Setup Menu” on page A-13
Menu Item Contents
Resolution Specifies the dots per inch (dpi) used when scanning
the document:
■ 150 dpi
■ 300 dpi
File Format Specifies the default file type the scanned image is
saved as:
■ TIFF
■ PDF
■ JPEG
B/W Compression Specifies the default compression method for
monochromatic images and text.
■ MH – Less compression, larger file size.
■ MR – More compression, smaller file size.
■ MMR – Maximum compression, smallest file size.
Email File Size
(Phaser 6121MFP/N or
/D printer configurations
only)
Specifies the size (from 1 to 10 MB) that data is sent
without being split into multiple attached files. Note
that to receive multiple file attachments, the
recipient’s email application must support divided
transmissions.
Lighten/Darken Specifies how light or dark the resulting scanned
image is (also called “scan density”). Range from -2
(lightest) to +2 (darkest).
Original Document Type Specifies the type of content being scanned:
■ Mixed – Text with images/photos.
■ Text – Text only.
■ Photo – Photos only.
Scan To: Specifies the default scan destination:
■ Email – Sends the scan to a specified email address
(Phaser 6121MFP/N or/D printer configuration
with network connection required).
■ PC – Scan Dashboard (Windows only)
■ USB Memory – Sends the scan to a USB flash drive
attached to the printer.
■ FTP – Sends the scan to an FTP server address
(Phaser 6121MFP/N or/D printer configuration
with network connection required).
To Next Page
Loading...
