EasyManua.ls Logo

Xerox PHASER 6121MFP - Initial Setup at the Control Panel

Xerox PHASER 6121MFP
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Phaser 6121MFP Service Manual 1-13
General Information
Controller
The following table lists controller functionality for the Phaser 6121MFP/S.
The following table lists controller functionality for the Phaser 6121MFP/N/D.
Characteristic Description
Memory RAM (128 MB)
Flash ROM (4 MB for F/W)
Interface USB 2.0 compliant
Hard Disk Not supported
Support Microsoft Windows Vista, Windows XP (Service Pack 2 or
later), Windows XP Professional x64, Windows Server
2003, Windows Server 2003 x64 Edition, Windows 2000
(Service Pack 4 or later)
Mac OS X (10.2.8 or later; We recommend installing the
latest patch)
Characteristic Description
Standard memory RAM (128 MB)
Flash ROM (4 MB for F/W)
Fax (6 MB)
Hard Disk Not supported
Interface USB 2.0 (High Speed) compliant, 10Base-T/100Base-T
Ethernet, Host USB (for scan to USB memory)
PSTN (Fax) Connector Two RJ11 (Phone and Line) for US models; phone port is
closed in European models
Support Microsoft Windows Vista, Windows XP (Service Pack 2 or
later), Windows XP Professional x64, Windows Server
2003, Windows Server 2003 x64 Edition, Windows 2000
(Service Pack 4 or later)
Mac OS X (10.2.8 or later; We recommend installing the
latest patch)

Table of Contents

Other manuals for Xerox PHASER 6121MFP

Related product manuals