Phaser 6121MFP Service Manual 6-39
Adjustments and Calibrations
Retrieving the Error Log History List
1. Enter the Service Mode.
2. Select Report and press the OK button.
3. Select Error Log History List and press the OK button.
Error Code List
Function
Print error code (Code) and error occurrence time (Error Times).
Procedure
1. Enter the Service Mode.
2. Select Report and press the OK button.
3. Select Error Code List and press the OK button.
T.30 Protocol List
Function
Print out T.30 or V8 protocol after communication with the following data:
• SESSION: Session number
• FUNCTION: Function Name
• DESTINATION STATION: Destination Name/Tel. No.
• DATE/TIME: Communication Date & Time
• PAGE: Total page number for this session
• MODE: Communication speed and ECM mode
• RESULT: Communication result
• TX: T.30 command sent by local Fax
• RX: T.30 command received from remote Fax
• DATA: T.30 frame that include address & control & Data
Procedure
1. Enter the Service Mode.
2. Select Report and press the OK button.
3. Select T.30 Protocol List and press the OK button.
To Next Page
Loading...
