A-8 Phaser 6121MFP Service Manual
Reference
Copy Default Setup Menu
Copy Default Setup ■ Paper Default (Phaser 6121MFP/N and /D printer
configurations only)
■ Original Document Type
■ Lighten/Darken
■ Collate Default (Phaser 6121MFP/N and /D printer
configurations only)
■ Sides Default (Phaser 6121MFP/N and /D printer
configurations only)
■ Preset Units (Phaser 6121MFP/S printer only)
For details, see “Copy Default Setup Menu” on
page A-8.
System Menu Provides accesses to the System Menu (page A-4).
Menu Item Function
Paper Default
(Phaser 6121MFP/N and
/D printer configurations
with the optional
500-sheet feeder
installed)
Specifies the default tray to use as the paper source
for copies. If you do not have Tray 2 installed
(optional only for Phaser 6121MFP/N and /D printer
configurations), this setting is not available.
Original Document
Type
Specifies the type of content being copied:
■ Mixed, Fine/Mixed – Text with images/photos.
■ Photo, Fine/Photo – Photos only.
■ Text, Fine/Text – Text only.
Lighten/Darken Specifies how light or dark the resulting copied image
is (also called “copy density”).
Collate Default
(Phaser 6121MFP/N and
/D printer configurations
only)
Specifies whether copy sorting is on or off.
Sides Default
(Phaser 6121MFP/N and
/D printer configurations
only)
■ Off – Double-sided copying is off.
■ Long Edge Flip – Copied pages are printed so that
they flip over at the side, along the long edge of the
paper.
■ Short Edge Flip – Copied pages are printed so that
they flip over at the top, along the short edge of the
paper.
Preset Units
(Phaser 6121MFP/S
printer configuration
only)
Specifies the unit of measurement used when setting
paper and copy sizes:
■ Inch
■ Metric
Menu Item Contents
To Next Page
Loading...
