Phaser 6121MFP Service Manual 3-51
Error Messages and Codes
Paper size error
Load ( ) paper
Paper size error in printing.
Output tray full
Remove output paper
The Output Tray is filled to capacity.
Tray2 open
Close Tray2
The 500-sheet feeder tray is open.
Tray2 empty
Load ( ) paper
The 500-sheet feeder tray is empty.
Top c ove r open
Close top cover
The top cover is open.
Duplex cover open
Close duplex cover
The Duplex Unit cover is open.
Reproduction of this
original may be
prohibited. Please
check the original.
This error occurs when the printer detects that it is
scanning currency.
Fax request ( )
Load ( ) paper
(Press any key)
A Fax job specifying a specific paper type/size has
been requested. Load the appropriate paper to
continue.
Phone line in use
Check the handset
The fax line is in use.
Phone line problem
Check phone line
(Press any key)
Fax line problem.
Redials failed
Please resend
(Press any key)
The specified number of redials failed to successfully
complete the fax job.
Fax data lost Fax data was lost. Retry sending the fax job.
Memory full
Unable to scan/fax
(Press any key)
The memory is full and the printer is unable to scan or
fax.
Memory file full
Unable to scan/fax
(Press any key)
Memory is full. Clear/print saved fax jobs.
Job cancelled
(Press any key)
The job was cancelled.
Unable to connect
xxxx Server
(Press any key)
The printer was unable to connect to the server.
Where xxxx can be SMTP, POP3, DNS, SMS, or LDAP.
FTP server error An error occurred at the server.
SMB server error
(Press any key)
An error occurred at the server.
Incorrect password
for xxxx Server
(Press any key)
The password specified for xxxx server is incorrect.
Where xxxx can be SMTP, POP3, LDAP, FTP, or SMB.
Message Description
To Next Page
Loading...
