8-58 Phaser 6121MFP Service Manual
Service Parts Disassembly
3. Remove 4 screws (two metal, 6mm, and two metal, 8mm).
4. Press down on the lower tab and remove the High Voltage Board.
When replacing the High Voltage Board:
1. Ensure that the board is installed underneath all four tabs. See step 4.
2. Use the correct screws on each side of the board (on the left use two
6mm screws, on the right use two 8mm screws).
s6121mfp-231
6mm
Metal
8mm
Metal
6mm
Metal
8mm
Metal
To Next Page
Loading...
