Xerox Phaser 8500 - Left Side Cover (PL1.0.9); Exit Cover (PL1.0.7)

8-6 Phaser 8400/8500/8550/8560 Color Printer Service Manual
Service Parts Disassembly
Left Side Cover (PL1.0.9)
1. Remove the Control Panel Cover (page 8-5).
2. Open the Exit Cover and Front Door.
3. Remove the rear screw.
4. Release the latching tabs and remove the Left Side Cover.
Exit Cover (PL1.0.7)
1. Remove the Right Side Cover (page 8-5).
2. Remove the Left Side Cover (page 8-6).
3. The Exit Cover will now just lift off the printer.
R
ep
l
acemen
t
N
o
t
e
Lift the upper exit guide slightly, and engage the pins on the upper exit
guide with the slots on the Exit Cover before inserting the cover hinge
pins into the pivot points in the printer frame.