Xerox Phaser 8500 Service Manual

Phaser 8400/8500/8550/8560 Color Printer Service Manual 9-3
Parts Lists
Using the Parts List
1. No.: The callout number from the exploded part diagram.
2. Part Number: The material part number used to order specific parts.
3. Qty: This number represents the parts per printer, not the number of parts
supplied in the actual part order.
4. Name/Description: Details the name of the part to be ordered and the
number of parts supplied per order.
5. Parts identified throughout this manual are referenced PL#.#.#. For
example, PL3.1.10 means the part is item 10 of Parts List 3.1.
6. A black triangle preceding a number followed by a parenthetical statement
in an illustrated parts list means the item is a parent assembly, made up of
the individual parts called out in parentheses.
7. The notation “with X~Y” following a part name indicates an assembly that
is made up of components X through Y. For example, “1 (with 2~4)”
means part 1 consists of part 2, part 3, and part 4.
8. An asterisk (*) following a part name indicates the page contains a note
about this part.
9. The notation (NS) next to a part indicates that particular part is not
spared, but contained in a kit or major assembly.
10. The notation “J1<>J2 and P2” is attached to a wire harness. It indicates
that connector Jack 1 is attached to one end of the wire harness and
connector J2 is attached to the other end that is plugged into P2.
N
o
t
e
Only parts showing part numbers are available for support. Parts not
showing part numbers are available on the parent assembly.
Legend:
Identifier Meaning
C C-ring
E E-ring
KL KL-clip
S Screw

Xerox Phaser 8500 Specifications

General

Brand	Xerox
Model	Phaser 8500
Category	Printer
Language	English