Xerox Phaser 8500 - Outer Duplex Guide with Safety Interlocks (PL3.0.4); Upper Duplex Guide with Solenoid (PL3.0.5)

8-34 Phaser 8400/8500/8550/8560 Color Printer Service Manual
Service Parts Disassembly
Outer Duplex Guide With Safety Interlocks (PL3.0.4)
1. Remove the Control Panel (page 8-5).
2. Remove 4 screws and remove the guide.
R
ep
l
acemen
t
N
o
t
e
Seat the guide on the chassis. Torque the 4 screws to 12 in. lbs.
Upper Duplex Guide with Solenoid (PL3.0.5)
1. Remove the Right Side Cover (page 8-5).
2. Remove the Outer Duplex Guide.
3. Disconnect the solenoid connector from the I/O Board and release the
harness from the right side frame.
4. Remove the Upper Duplex Guide from the printer.
s8500-098
Outer Duplex Guide
Lower Inner Duplex Guide
Lower Exit Guide Assembly
Inner Simplex Guide