06/2014
4-65
WC 5022/5024
Repairs and Asdjustments
Version 1.0
REP 19.1.1 Front Cover
Parts List on PL 19.1
Removal
WARNING
When turning OFF the power switch, check that the 'Data' lamp is OFF and that there is
no Job in progress.
Turn OFF the power switch and make sure that the screen display turns OFF.
Check that the power switch is OFF and unplug the power plug.
1. Remove the Drum Cartridge. (REP 8.1.1)
2. Remove the Toner Cartridge. (PL 8.1)
3. Remove the Fusing Unit Cover. (Figure 1)
a. Remove the screw.
b. Remove the Fusing Unit Cover.
Figure 1 j0mg41901
4. Remove the screw that secures the Front Cover at the right. (Figure 2)
a. Remove the screw.
Figure 2 j0lj41902
5. Remove the Front Cover. (Figure 3)
a. Remove the screw.
b. Remove the Front Cover.
Figure 3 j0lj41903
Replacement
1. To install, carry out the removal steps in reverse order.
2. When installing the Front Cover, attach the hook (x3) of the Front Cover to the Frame.
(Figure 4)
• There are also hooks at the left of the Front Cover.
To Next Page
Loading...
