Xerox WorkCentre 5024

06/2014
4-91
WC 5022/5024
Repairs and Asdjustments
Version 1.0
Figure 4 j0lj45634
12. Remove the Bracket and Ground Plate at the front. (Figure 5)
a. Remove the Tapping Screw (x3).
b. Loosen the screw.
c. Remove the Bracket and Ground Plate.
Figure 5 j0lj45636
NOTE: Be careful so as to not lose the gear under the Bracket and Ground Plate. (Figure
6)
Figure 6 j0lj45641
13. Remove the Knob Handle. (Figure 7)
a. Remove the gear.
b. Remove the Knob Handle.
Figure 7 j0lj45637
14. Remove the bearing at the front. (Figure 8)