2-31
Bracket unit
3. Hold the “DN” (down) side of the PTT switch pushed.
The PTT switch can be used not only on the remote control lever side, but also on the bottom cowling
side.
4. Operate the trim zero set while keeping the “DN” (down) side of the PTT switch pushed.
• For how to operate the trim zero set, see the owner’s manual included with the gauge.
• When the PTT TotalTilt™ function is activated, the PTT buzzer will sound once.
• When the PTT TotalTilt™ function is deactivated, the PTT buzzer will sound twice.
DN
To Next Page
