YASKAWA P1000 Technical Manual

u
Copy Function
Parameter settings can be copied to another drive to simplify parameter restoration or multiple drive setup. The drive supports
the following copy options:
• LCD Operator (standard in all models)
The LCD operator used to operate the drive supports copying, importing, and verifying parameter settings and contains a
Real Time Clock.Refer to o3: Copy Function on page 272 for details.
• USB Copy Unit and CopyUnitManager
The copy unit is an external option connected to the drive to copy parameter settings from one drive and save those settings
to another drive. Refer to the manual supplied with the USB Copy Unit for instructions.
The CopyUnitManager is a PC software tool. It allows the user to load parameter settings from the Copy Unit onto a PC,
or from the PC onto a Copy Unit. This is useful when managing parameters for various drives or applications. Refer to the
manual supplied with the CopyUnitManager for instructions.
• DriveWizard Industrial
DriveWizard Industrial is a PC software tool for parameter management, monitoring, and diagnosis. DriveWizard Industrial
can load, store, and copy drive parameter settings. For details, refer to Help in the DriveWizard Industrial software.
4.10 Verifying Parameter Settings and Backing Up Changes
138
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual

YASKAWA P1000 Specifications

General

Operating Temperature	-10°C to +50°C (14°F to 122°F)
Cooling Method	Fan Cooled
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Frequency Range	0.1-400 Hz
Power Rating	0.4 kW to 630 kW
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault
Protection Features	Electronic Thermal Overload Protection
Communication	Modbus RTU
Communication Interface	RS-485
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Enclosure Rating	IP20