YASKAWA P1000 Technical Manual

u
b8: Energy Saving
No.
(Addr.
Hex)
Name Description Values Page
b8-01
(1CC)
Energy Saving Control
Selection
0: Disabled
1: Enabled
Default: 0
Range: 0, 1
175
b8-04
(1CF)
Energy Saving Coefficient
Value
Determines the level of maximum motor efficiency. Setting range is 0.0 to
2000.0 for drives 3.7 kW and smaller. The display resolution depends on the
rated output power of the drive.
Default:
<1> <2>
Min.: 0.00
Max.: 655.00
175
b8-05
(1D0)
Power Detection Filter Time
Sets a time constant filter for output power detection. Default: 20 ms
Min.: 0
Max.: 2000
176
b8-06
(1D1)
Search Operation Voltage
Limit
Sets the limit for the voltage search operation as a percentage of the motor
rated voltage.
Default: 0%
Min.: 0
Max.: 100
176
<1> Default setting is dependent on parameter o2-04, Drive Model Selection.
<2> Parameter value changes automatically if E2-11 is manually changed or changed by Auto-Tuning.
B.3 b: Application
440
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual

YASKAWA P1000 Specifications

General

Operating Temperature	-10°C to +50°C (14°F to 122°F)
Cooling Method	Fan Cooled
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Frequency Range	0.1-400 Hz
Power Rating	0.4 kW to 630 kW
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault
Protection Features	Electronic Thermal Overload Protection
Communication	Modbus RTU
Communication Interface	RS-485
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Enclosure Rating	IP20