YASKAWA P1000 Technical Manual

E. QUICK REFERENCE SHEET .............................................................................. 569
E.1 Drive and Motor Specifications........................................................................................570
Drive Specifications......................................................................................................................... 570
Motor Specifications ........................................................................................................................ 570
E.2 Basic Parameter Settings .................................................................................................571
Basic Setup ..................................................................................................................................... 571
V/f Pattern Setup ............................................................................................................................. 571
Motor Setup..................................................................................................................................... 571
Multi-Function Digital Inputs ............................................................................................................ 571
Pulse Train Input/Analog Inputs ...................................................................................................... 572
Multi-Function Digital Outputs ......................................................................................................... 572
Monitor Outputs............................................................................................................................... 572
E.3 User Setting Table.............................................................................................................573
INDEX ................................................................................................................... 579
Table of Contents
14
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual

YASKAWA P1000 Specifications

General

Operating Temperature	-10°C to +50°C (14°F to 122°F)
Cooling Method	Fan Cooled
Output Voltage	0-Input Voltage
Output Frequency	0-400 Hz
Frequency Range	0.1-400 Hz
Power Rating	0.4 kW to 630 kW
Control Method	V/f Control
Overload Capacity	150% for 60 seconds
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit, Ground Fault
Protection Features	Electronic Thermal Overload Protection
Communication	Modbus RTU
Communication Interface	RS-485
Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000m (3280ft) without derating
Enclosure Rating	IP20