EasyManua.ls Logo

YASKAWA P1000

YASKAWA P1000
594 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting 0: Inch of Water (WC)
Setting 1: Pounds per Square Inch (PSI)
Setting 2: Gallons per Minute (GPM)
Setting 3: Degrees Fahrenheit (F)
Setting 4: Cubic Feet per Minute (CFM)
Setting 5: Cubic Meters per Hour (CMH)
Setting 6: Liters per Hour (LPH)
Setting 7: Liters per Second (LPS)
Setting 8: Bar (Bar)
Setting 9: Pascals (Pa)
Setting 10: Degrees Celsius (C)
Setting 11: Meters (Mtr)
Setting 12: Feet (Ft)
Setting 13: Liters per Minute (LPN)
Setting 14: Cubic Meters per Minute (CMM)
Setting 15: Inches of Mercury (Hg)
Setting 24: Custom Units (determined by o1-13 to o1-15)
Setting 25: None
n
o1-10: User-Set Display Units Maximum Value
Determines the display value that is equal to the maximum output frequency.
No. Name Setting Range Default
o1-10 User-Set Display Units Maximum Value 1 to 60000
Determined by
o1-03
n
o1-11: User-Set Display Units Decimal Display
Determines how many decimal points should be used to set and display the frequency reference.
No. Name Setting Range Default
o1-11 User-Set Display Units Decimal Display 0 to 3
Determined by
o1-03
Setting 0: No Decimal Point
Setting 1: One Decimal Point
Setting 2: Two Decimal Points
Setting 3: Three Decimal Points
n
o1-13: Frequency Reference and Frequency Related Monitor Custom Units 1
Sets the first character of the customer-specified unit display when o1-03 is set to 3 and o1-09 is set to 24.
No. Name Setting Range Default
o1-13
Frequency Reference and Frequency Related Monitor Custom Units
1
30 to 7A 41
n
o1-14: Frequency Reference and Frequency Related Monitor Custom Units 2
Sets the second character of the customer-specified unit display when o1-03 is set to 3 and o1-09 is set to 24.
No. Name Setting Range Default
o1-14
Frequency Reference and Frequency Related Monitor Custom Units
2
30 to 7A 41
n
o1-15: Frequency Reference and Frequency Related Monitor Custom Units 3
Sets the third character of the customer-specified unit display when o1-03 is set to 3 and o1-09 is set to 24.
5.10 o: Operator Related Settings
YASKAWA SIEP YAIP1U 01C AC Drive - P1000 Technical Manual
269
5
Parameter Details

Table of Contents

Other manuals for YASKAWA P1000

Related product manuals