YASKAWA yasnac i80m

—
NOTE
—
1.
Manual
jog
feed
for
returning-to-suspended
operation point
Manual
jog
feed
cannot
be
used
to
return
to
the
processing-suspended
operation
point
unless the
return-to-suspended
operation
point
switch
is
turned
OFF.
2.
Position
of
suspended
operation
point
after
changing
from
auto
mode
to
manual mode
and
resetting.
If
the
system
is
reset
after
changing
from
auto
mode
to
manual
mode,
the
tool
returns
to
the
suspended
operation
point.
While
the
tool
is
on
the
way
toward
the
suspended
operation
point,
manual
jog
feed
cannot
be
used
unless
the
return-to-suspended
operation
point,
switch
is
turned
off,
as
explained
in
NOTE
1.
3.
Suspended
Operation
point
After
a
series
of
moves
in
successive
changes
from
the
auto
to
manual
mode
and
vice
versa,
the last
point
where
the
auto
mode
is
changed
to
the
manual
mode
is used
for
the
suspended
operation
point.
4.
Return-to-suspended
operation
point
If
the
home
positioning
switch
or
the
second
home
positioning
switch
is
ON,
return-to-suspended
operation
point
is
not
performed.
Instead,
the
tool
returns to
the home
position
or
the second home
position.
E
-
609
-