Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 136
8. Select the profiles you wish to assign to the touch panel user.
Note
· Tap the Assign all button to select all available profiles.
· To remove all previously assigned profiles, tap the Assign none
button.
9. Tap the Save button.
ÜThe profile is assigned.
ÜThe New touch panel user view is displayed.
10.Tap the Assign room/group/zone button.
ÜThe Assign rooms/groups/zones view is displayed.
11.Select the desired rooms/groups/zones you wish to assign to the touch panel
user.
Note
· You can filter the rooms, groups and zones by tapping Show all or
Show assigned only in the dropdown menu. You can also search for
rooms, groups and zones in the search field.
· When a room is assigned to a user, the user will also have access to
any groups created in this room in future.
12.Tap the Save button.
ÜThe room/group/zone is assigned.
ÜThe New touch panel user view is displayed.
13.Tap the Save button.
ÜThe touch panel user is created.
ÜThe User has been created view is displayed.
14.Tap the Copy and close button to save the password to the clipboard and then
close the view.
– or –
14.Tap the Close button.
ÜThe User management view is displayed.
15.Tap this button to access the app overview.
Note
The selected password can be used to log in directly. A first-time login
process, where the language is selected and the password is set, is not
necessary.
To Next Page
Loading...