Zumtobel LITECOM - Page 157

Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 156
3. Enable polling of one property.
ÜPolling of the property is enabled.
4. Tap the arrow next to the frequency to view the frequency options.
5. Select the frequency of polling (High, Medium, Low).
6. Tap the Save button.
ÜChanges to the profile are saved.
i
Note
We recommend downloading the DALI data profile after configuration is
complete.
7. Tap this button to access the app overview.