Zumtobel LITECOM - Page 50

Commissioning
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 49
Function
Brief description
i
Note
· Rooms and groups within the zone are not shown in
the system image. The rooms and groups in a zone
can only be seen in the Zones app.
· You cannot create any new zones in the system
image.
· For more information see Section Zones
Rename room or zone
The pencil icon to the right of a room or zone can be used to rename
the room/zone.
Delete room
The pencil icon to the right of a room can also be used to delete the
room.
· If a room is deleted all groups in this room and all devices within
these groups are also deleted.
· If this room is already used as the effective range for a function
(e.g. conditional scene recall), this assignment is also deleted.
· If the room to be deleted is part of a zone, it is also deleted from
the zone.
Delete zone
The pencil icon to the right of a zone can also be used to delete the
zone.
· All control equipment that is directly assigned to a zone will also
be deleted when the zone is deleted.
· Rooms and groups that were part of this zone are not deleted,
however.
· If this zone is already used as the effective range for a function
(e.g. conditional scene recall), this assignment is also deleted.
(10)
Select group
Tap the arrow in front of a group to view the devices in this group.
Rename group
The pencil icon to the right of a group can be used to rename the
group.
Rename device
The pencil icon to the right of a device can be used to rename the
device.
Delete group
The pencil icon to the right of a group can also be used to delete the
group. If a group is deleted all devices within this group are also
deleted.
Delete or remove a device
The pencil icon next to a device can be used to delete the device.
i
Note
· If the device is linked, the Remove button is displayed
instead of the Delete button.
· If the linked device is deleted on the original
LITECOM CCD control device, it is also deleted on
the linked LITECOM CCD control device.
For more information see Section Deleting or removing
linked devices
i
Note
· The icon to the left of the device name indicates the device type.
For more information see Section Icons
· If an exclamation mark is displayed to the right of the device name, a fault has occurred for this
device. The Faults app contains an overview of all current faults in the LITECOM system.
For more information see Section Faults
124
149
178
168