Zumtobel LITECOM - Page 84

Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 83
Remote control
(1)
Scene key 1
(2)
Scene key 2
(3)
Scene key 3
(4)
Preset key B
(5)
Preset key A
(6)
Preset key C
(7)
Preset key D
(8)
On/off key
(9)
Programming key
(10)
Dimming key +
(11)
Dimming key -
(12)
Preset key E
Table 37: Components of a remote control (e.g. IRTOUCH 2)
The following table provides a description of the individual configuration options:
Parameter
Description
On/off key
Presence scene
Scene, which the user recalls using the on/off key when exiting the room.
Mode of operation (presence scene)
Mode of operation controlled when the presence scene is recalled.
Fade time to presence scene
Time during which the absence scene changes to a value (scene,
presence value).
Absence scene
Scene, which the user recalls using the on/off key when entering the room.
Mode of operation (absence scene)
Mode of operation controlled when the absence scene is recalled.
Fade time to absence scene
The time it takes to change from one value (scene, presence value) to the
absence scene.
Scene key 1
Scene key 1
Scene recalled with scene key 1.
Mode of operation (scene key 1)
Mode of operation controlled with scene key 1.
Fade time (scene key 1)
The time it takes to change from one value (scene, presence value) to
scene 1.
Scene key 2
Scene key 2
Scene recalled with scene key 2.
Mode of operation (scene key 2)
Mode of operation controlled with scene key 2.
Fade time (scene key 2)
The time it takes to change from one value (scene, presence value) to
scene 2.
Scene key 3
Scene key 3
Scene recalled with scene key 3.
Mode of operation (scene key 3)
Mode of operation controlled with scene key 3.
Fade time (scene key 3)
The time it takes to change from one value (scene, presence value) to
scene 3.