Configuration
LITECOM, Commissioning and maintenance instructions 17.0 | 04.2024 | en 84
Group or device controlled with preset key A.
Mode of operation (preset key A)
Mode of operation controlled with preset key A.
Reverse operation (preset key A)
The function of the adjust key for preset key A is reversed with this setting.
This is recommended in the event of incorrect wiring, for example.
Group or device controlled with preset key B.
Mode of operation (preset key B)
Mode of operation controlled with preset key B.
Reverse operation (preset key B)
The function of the adjust key for preset key B is reversed with this setting.
This is recommended in the event of incorrect wiring, for example.
Group or device controlled with preset key C.
Mode of operation (preset key C)
Mode of operation controlled with preset key C.
Reverse operation (preset key C)
The function of the adjust key for preset key C is reversed with this setting.
This is recommended in the event of incorrect wiring, for example.
Group or device controlled with preset key D.
Mode of operation (preset key D)
Mode of operation controlled with preset key D.
Reverse operation (preset key D)
The function of the adjust key for preset key D is reversed with this setting.
This is recommended in the event of incorrect wiring, for example.
Group or device controlled with preset key E.
Mode of operation (preset key E)
Mode of operation controlled with preset key E.
Reverse operation (preset key E)
The function of the adjust key for preset key E is reversed with this setting.
This is recommended in the event of incorrect wiring, for example.
Table 38: Configuration options – Remote control
To Next Page
Loading...