Configuration
208
Aastra 470 ab R3.0
syd-0337/1.5 – R3.0 – 05.2013
Configuration with AMS (online)
If a communication system that has already been configured is present, the config-
uration can be loaded from the configuration server in AMS and edited online (see
"Connect (Online)", page 203).
If the system to be configured is in the first-start state, the country-specific default
values are loaded.
See also:
Part of the configuration settings is also accessible via the System Assis-
tant function on the Office 45. A separate set of User’s Guide is available
for this.
Activating the licences
The licence information is stored on the EIM (Equipment Identification Module)
card.
The licence information includes:
• The EID (Equipment Identification) serial number of the EIM card
• The sales channel identification CID (Channel Identification)
• Licence code LIC
• System type
Each communication server is supplied with a licence certificate containing the
above information (without licence code). Please keep the certificate in a safe
place.
Tab. 91 Example of licence information
The licences must be activated. The licence code can be edited both online and of-
fline with AMS:
1. The licence has to be activated with the aid of the EID via the Aastra 400 activa-
tion portal on the extranet (partner login required). The licence code issued as a
result contains the appropriate Software Release licence (and any other licences
you may have acquired).
Licensing
Equipment Identification (EID): 81154445474349760E5844D276000035A317
Channel Identification (CID): 0
Licence code (LIC): 0408040158F396792739
System type: Aastra 470
To Next Page
Loading...
Need help?
General